Chocolate Brownie Audio Clips
Boogie Powered
Ok, here's the setup. The speaker cabinets were miked using an SM 57 at about 6"off the speaker towards the outside rim. The SM 57 went into a Behringer Ultragain Mic Pre with the gain kept at at a nominal level so as not to introduce much preamp tube distortion.
I used a Jackson JDR-94 Concept 6 string electric guitar, which has an H-S-H pick up configuration. I used several pickup combinations, including neck humbucker / middle single coil and bridge humbucker.
The amps were run at normal operating levels which means that the Boogie master was set to about 3 1/2. The Marshall purrs nicely with the master set to about 8 1/2.